Our Services
Four disciplines.
One technical team.
Components, lighting, controls and OEM manufacturing, all drawing on the same foundation: a detailed understanding of how components, controls and fixtures work together. That is what allows us to specify, adapt and support a project at every layer.
The building blocks of every fixture.
We source, specify and supply the components that determine how a lighting product performs. Every recommendation is based on how the part behaves in the circuit, not on a catalogue listing.
LED Drivers & Power Supplies
Constant-current and constant-voltage drivers for indoor and outdoor use, with TRIAC, 0-10V and DALI dimming, including Helvar DALI-2 drivers.
COBs & SMD Arrays
High-efficacy chips from leading manufacturers across the full CRI range, including R9-optimised and tunable-white options. Our own luminaires are built on Citizen light sources.
LED Modules
Ready-to-integrate modules for OEM fixtures, with custom PCB layouts available for volume orders.
Optics & Lenses
Secondary optics including TIR lenses, reflectors and diffusers, with beam angles from 5° to 120°.
Heatsinks & Thermal Management
Extruded and die-cast aluminium heatsinks, thermal interface materials and thermal simulation support.
DALI-2 drivers from the catalogue
LC12TINY-DA-180-700
LC20MN22-DA-80-500
LC26MINI-DA-250-700
LC26MINI-DA-250-700-SR
LC27MINI-DA-150-700
LC38MINI-DA-300-1050-SR
LC43MINI-DA-150-1050
LC43MN22-DA-300-1050
LC44SEC-DA-500-1000-LOOP
LC45SE-DA-150-1050-LOOP
Lighting systems, engineered from the component up.
Track systems, lighting controls and bespoke fixtures, designed by a team that understands the components inside them. Our luminaires and track systems are built on Citizen, Helvar and A.A.G. Stucchi components. That depth widens what can be specified, and what can be delivered.
Track Lighting Systems
Single-circuit and multi-circuit track in recessed, surface and suspended formats, compatible with major track standards. 230 V and 48 V systems, curved track built to the architecture, data running through the track, and profiles in custom RAL finishes. Over 50 track lighting projects, from museum galleries to flagship stores.
Lighting Controls
DALI-2 and DMX control systems, presence sensing, daylight harvesting and smart building integration. Design, programming and commissioning are covered under Controls & Intelligence below.
Bespoke Fixture Design
Custom fixtures engineered to your specification, from initial concept to production-ready drawings. We design and manufacture luminaires for residential, commercial and architectural spaces.
Project Consulting
Technical support throughout a lighting project, including component selection, value engineering and specification review.
DALI-2 controls and sensors
13xD2 Modular Panels (DALI-2)
14xD2 Control Panels (DALI-2)
320D2 PIR Sensor (DALI-2)
320D2TR PIR Sensor DALI-2, Track
321D2 Multisensor (DALI-2)
321D2TR Multisensor DALI-2, Track
322D2 High Bay Multisensor (DALI-2)
322D2TR High Bay Multisensor DALI-2, Track
324D2 Multisensor DALI-2 R44
325D2 Multisensor High Bay DALI-2 R60
See it in action
The part that decides how the light behaves.
For over a decade we have designed, programmed and commissioned lighting controls, and where no product does the job we write the software and build the hardware ourselves. You own the design intent, we make it work through to handover.
Systems we work with
Helvar DALI, Casambi, KNX and LogicMachine, plus Dynalite, BACnet and Modbus. We pick the platform that fits the project, not the one we happen to stock.
SAMA touch panels
Our own in-wall panels, 4 inch and 10.1 inch, running software we write. The UI follows your scene names and graphics, whatever system sits behind the wall.
Working with designers
You send layouts and moods, we come back with a zoning and scene plan in your language. Scenes are set on site with you, so what the client sees matches your renders.
Integration and commissioning
Lighting tied into AV, fire alarm, BMS, blinds and HVAC. Programmed on site, handed over with documentation, and supported remotely afterwards.
BeamUI
Browser-based commissioning for Helvar systems, from a laptop, tablet or phone. Every change is written, read back and logged. Available to commissioners with a licensed Helvar Designer.
BeamWatch
Monitors every Helvar router around the clock. It only reads and never sends a command, so it is safe on a live building. Faults, usage and an energy estimate, with history kept on site.
BeamEdge
The small on-site unit that runs BeamWatch and gives the building management system lighting data over BACnet/IP and MQTT. Read-only, and it works fully offline.
- HelvarDALI routers, drivers and sensors
- CasambiWireless Bluetooth mesh
- LogicMachineOpen edge controller, KNX and DALI
- KNXResidential and building automation
- DynaliteVia our SAMA 4 panel
- DALI-2IEC 62386 drivers and devices
- BACnet / ModbusBMS and SCADA links
- EelectronKNX keypads, panels and devices
- Fire alarmEmergency overrides and interlocks
Custom manufacturing, from concept to delivery.
We design and produce lighting products to your specification. Direct relationships with component manufacturers give tighter control over cost and shorter lead times than working through an intermediary.
Custom Fixture Manufacturing
End-to-end OEM production covering mechanical design, PCB layout, thermal analysis and factory coordination.
Value Engineering
Equivalent optical performance at a lower bill-of-materials cost, achieved through better component selection rather than reduced quality.
Supply Chain Management
Direct manufacturer relationships for key components, with inventory buffering and lead-time planning for your programme.
Quality Assurance
IES photometric testing, electrical safety pre-compliance and burn-in testing, with documentation for every shipment.
Calculators and planners for the spec stage.
- Luxtron in your AI assistantConnect Claude, ChatGPT or Cursor to our catalogue and tools, and ask in plain words.Connect your assistant →
- Submittal builderOne project PDF for a whole lighting package, ready to send to the consultant.Open the submittal builder →
- DALI line plannerHow many DALI lines and power supplies a floor needs, before anyone draws a schematic.Plan DALI lines →
- Driver MCB calculatorHow many LED drivers can share one circuit breaker, from inrush and running current.Size breakers →
- Track run plannerA parts list for a track run: lengths, joints, corners, feeds and end caps.Plan a track run →
- Item code finderPaste any item code from our catalogue and see exactly what it is.Look up a code →
Delivered across ten countries.
- 100s of spaces lit
- 10 countries
- 50+ track lighting projects
- 10+ years in the lighting industry
CommercialSiemens Experience Centre, Expo 2020
RetailNissan Car Showroom
ExhibitionKohler Booth, Dubai Design Week 2025
Planning a project? Share the brief and we will respond with a clear technical view of what is achievable.
Get in Touch