Tools

Tools for specifiers.

Free, in the browser, no account. Built on the same product data as the catalogue.

Submittal builder

One project PDF for a whole lighting package, ready to send to the consultant.

  • Pick products from the full catalogue and put them in the order you want them in the PDF.
  • Luxtron products go in as their real datasheets, page for page; partner products get a clean generated spec page.
  • Choose the exact configuration: a Helvar panel layout, or a track fixture by item code, CCT and optic.
  • Add the project name, company and contractor once and they appear on every page.
Open the submittal builder
The submittal builder: a product picker on the left and the numbered list of selected products on the right

DALI line planner

How many DALI lines and power supplies a floor needs, before anyone draws a schematic.

  • Enter drivers, sensors and panels with their bus current.
  • Checks the 64-address, 16-group and bus-current limits per line.
  • Tells you which limit sets the number of lines, so you know what to change.
Plan DALI lines
The DALI line planner with a device list and the resulting number of lines

Driver MCB calculator

How many LED drivers can share one circuit breaker, from inrush and running current.

  • Enter the driver quantity, its mains current and the per-breaker figures from its datasheet.
  • Checks both the inrush limit and the continuous current limit.
  • Shows how many breakers you need and which limit decides it.
Size breakers
The MCB calculator showing drivers per breaker and the number of breakers needed

Track run planner

A parts list for a track run: lengths, joints, corners, feeds and end caps.

  • Pick ONETRACK (230 V) or EVO (48 V) and enter each run.
  • Get the track sections, couplers, feeds and end caps with links to each part.
  • Use it as a starting point for the submittal and the quote.
Plan a track run
The track run planner with a run list and the resulting parts list

Item code finder

Paste any item code from our catalogue and see exactly what it is.

  • Finds the product, brand and key specs behind a Helvar, Stucchi, Electroterminal, Eutrac or Almeco code.
  • Works with part of a code or a product name too, to see everything that matches.
  • For Stucchi track fixtures it opens the product page with that CCT, optic and finish already selected.
Look up a code
The item code finder showing the products that match a typed code

Need something these don't do yet? Tell us what would save you time on a project.

Get in touch